Print Page - Radiator cap replacement

Title: Radiator cap replacement
Post by: Zitrone1000 on July 30, 2009, 01:25:41 pm

Yahoo Message Number: 50237 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50237)

Need to replace my radiator cap, but I am not able to make out the pressure that is stamped on the old one. Hopefully there is some one at this forum that can help me. It is the 300 Gillig chassis with the C 8.3 300 HP engine Thank you.
Dick 96 Intrigue 10203

Title: Re: Radiator cap replacement
Post by: Countryjrc on July 30, 2009, 02:11:27 pm

Yahoo Message Number: 50241 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50241)

Ours was a 7 pound cap. We were losing fluid pulling steep grades in Arizona in the summer time and went to a 15 pound 4 years ago. Have not had any leakage or problems since. You might have leaks with the increased pressure if you increase it. Joh 2002 Allure
#30702

Title: Re: Radiator cap replacement
Post by: Wrestler_3001 on July 30, 2009, 05:07:30 pm

Yahoo Message Number: 50252 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50252)

what year is your coach, its gonna be a 7 or a 15

Title: Re: Radiator cap replacement
Post by: Zitrone1000 on July 30, 2009, 05:45:58 pm

Yahoo Message Number: 50255 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50255)

Quote from: wrestler_3001"

what year is your coach, its gonna be a 7 or a 15

Like I said in my original post it is a 1996.
Dick 96 intrigue 10203

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Zitrone1000 on July 30, 2009, 01:25:41 pm