Print Page - Crack in black plastic in plumbing bay

Title: Crack in black plastic in plumbing bay
Post by: Harry Season on August 12, 2009, 04:37:49 pm

Yahoo Message Number: 50774 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50774)

While out in the coach this past weekend I noticed that the black plastic in our plumbing bay has cracked in two places. They are located on the 90 deg corner that goes from the outside edge of the plumbing bay down to the level of the outlets that have openings for sewer and water hoses. The cracks are so large that you can see through them, probably on the order of a ¼" or so and extend about 3 inches on one crack and 1 inch on the other. Has anybody else seen this and any ideas on how one might go about repairing this absent the whole thing being dropped out and replaced? Harry

06 Inspire 51933

Title: Re: Crack in black plastic in plumbing bay
Post by: Al on August 12, 2009, 05:39:22 pm

Yahoo Message Number: 50775 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50775)

Try JB Weld, available at most hardware & auto parts stores.
AL

00 affinity #5851

Title: Re: Crack in black plastic in plumbing bay
Post by: Ramjetcal_01 on August 12, 2009, 08:42:30 pm

Yahoo Message Number: 50781 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50781)

Greetings

I got rid of all that plastic molded stuff and remodeled my plumbing bay with .041 diamond plate aluminum, looks super, and I never have to worry about it cracking again. really easy to do, while I was at it I installed an electric gray water valve and dual filters.

Jerry

2004 Inspire 51012

Title: Re: Crack in black plastic in plumbing bay
Post by: George Eklima on August 13, 2009, 06:29:06 am

Yahoo Message Number: 50792 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50792)

Jerry,
You don't by chance have any pictures of the project do you? Or even the finished product?
George
'04 Inspire 51061

Title: Re: Crack in black plastic in plumbing bay
Post by: Ramjetcal_01 on August 13, 2009, 09:41:02 am

Yahoo Message Number: 50795 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50795)

Hi George

I'll take a few pics and e-mail them to you off group.

Jerry

2004 Inspire 51012

Title: Re: Crack in black plastic in plumbing bay
Post by: Harry Season on August 13, 2009, 09:42:56 am

Yahoo Message Number: 50796 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50796)

Thanx, Jerry. I'd like to see them too.
Harry

06 Inspire 51933

Title: Re: Crack in black plastic in plumbing bay
Post by: Ramjetcal_01 on August 13, 2009, 09:47:00 am

Yahoo Message Number: 50797 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50797)

Hi Harry

I'll take them today and send them to you also

Jerry

2004 Inspire 51012

Title: Re: Crack in black plastic in plumbing bay
Post by: Ramjetcal_01 on August 13, 2009, 10:38:57 am

Yahoo Message Number: 50798 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50798)

So much interest has be generated the pictures of 2004 Inspire water bay redo has been added to the group photos.

Thanx
Jerry

2004 Inspire 51012

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Harry Season on August 12, 2009, 04:37:49 pm