Yahoo Message Number: 50844 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50844)
A few weeks back there was a post about the cabinet catches, the ones that have two ball bearings in them. I can't locate that post and it had a link to a supplier that you could buy these things from. Can anybody help me locate that post.
Thanks
Yahoo Message Number: 50845 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50845)
Is this it? http://www.thehardwarehut.com/catalog-product.php?p_ref=4537 (http://www.thehardwarehut.com/catalog-product.php?p_ref=4537)
Jim
07 Allure #31570
Yahoo Message Number: 50848 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50848)
Jim,
Matt Carr here, former plant manager in the cabinet shop at Country coach. Almost 90 % of the time the catches just need adjusted. There is a standard screw in each end of the catch portion that is attached to your faceframe. Try tightening that first. If that doesn't work let me know. I know the make and model #. I would have to go to my shop to look it up. Try the adjustment first.
Matt
Yahoo Message Number: 50857 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50857)
Jim had t replace a few of my catches, found them a my local lumber co. about $4 each.
Bill 51166
Yahoo Message Number: 50859 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/50859)
Thanks for the answers guys.
Matt, I know about the adjustment, but some of mine have missing ball bearings. We are at a rally in Harrisburg right now and will be going over to the Guaranty service "campground" on Sun. afternoon, have a service appt. on Mon.