Yahoo Message Number: 62387 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/62387)
The results of my replacing the rear ride height valves on my coach reveled the fact that when the valve set up was changed from two in the front to two in rear the left rear was mis-mounted. The right rear was mounted square to the world, the left was mounded at an angle causing the neutral position to be at an upward direction requiring the adjustment to be moved higher on the vertical rod. Remounted and leveling the coach was much easier.
Also, for your info, the new valves have a smaller bolt hole and a slightly different alignment. I was able to mount using 5/16" bolts with out re-drilling.
Dave
aka Billy Byte (trusty hound)
2000 Allure #30443
Yahoo Message Number: 62389 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/62389)
Good info, I'll file this info for the future - hope to never need it:)! Smitty
04 Allure 31017