Print Page - Loose Steering Column Support Bolts

Title: Loose Steering Column Support Bolts
Post by: Fred Kovol_01 on April 04, 2003, 06:21:56 pm

Yahoo Message Number: 4640 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/4640)

Hi Folks,

I was looking for a good spot to mount a brake control assembly and decided on using one of the bolts that secure the steering column to the support bracket. There are 4 shinny bolts with 9/16" heads - two on each side of the steering column support bracket. When I went to unlossen the bolts, I found them about finger tight. All have flat washers on both ends of each bolt and lock washers on the nut end.

Fred Kovol

2000 Allure 30593

Title: Re: Loose Steering Column Support Bolts
Post by: Lee Casebeer_01 on April 04, 2003, 06:30:45 pm

Yahoo Message Number: 4641 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/4641)

Lucky you, Fred, on the loose Bolts. Hopefully Somebody from CC qualilty Control is reading these messages.........
Lee '01 Intrigue, #11219, with Tight Steering Bolts ! ! ! ! "fredkovol" fredkovol@...> wrote:

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Fred Kovol_01 on April 04, 2003, 06:21:56 pm