Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Boxerdude3 on November 14, 2010, 03:27:53 pm

Title: Smartire
Post by: Boxerdude3 on November 14, 2010, 03:27:53 pm
Yahoo Message Number: 65490 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/65490)
I seem to have a great deal of questions for the group. Being a 1st time RV'er I have much to learn and this seems to be the place to be. In my massive box of manuels I have a laminated CC sheet describing how to use the Smartire system. I have not seen any instruments on the dash relating to Smartire. Did the original owners take the system with them? Thanks
Tom

2005 Inspire # 51177
Title: Re: Smartire
Post by: Smitty on November 14, 2010, 03:37:24 pm
Yahoo Message Number: 65491 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/65491)
On our 04 Allure, the Smart Tire display is mounted on the left side of the steering wheel on a small ledge of the instrument pane. Black, about 4" wide, 2 1/" tall. Looke for a few buttons on the surface, one will say mode. If not somewhere up where you can see if from the driver seat, then they must have removed it. Or, perhaps it was an option for this model on that year, and they did not choose this option?

Good luck,
Smitty

04 Allure 31017
Title: Re: Smartire
Post by: Stephen Brown on November 14, 2010, 05:41:33 pm
Yahoo Message Number: 65495 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/65495)
I to looked for such a thing after I purchased my Inspire in 04' (#51168). It was not installed in the Inspires in 04' and I'm guessing also in 05'. I purchased it in 06' and had it installed.

Steve
Title: Re: Smartire
Post by: Techjiaest on November 15, 2010, 10:16:44 am
Yahoo Message Number: 65515 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/65515)
ON our '06 Allure the Smart Tire controls/readouts ar epart of the VMS computer system...if you have the VMS it may just not be programmed.