Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Larry Hanson on June 14, 2003, 07:42:12 pm

Title: Engine monitor
Post by: Larry Hanson on June 14, 2003, 07:42:12 pm
Yahoo Message Number: 5140 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/5140)
I recently purchased a silverleaf monitor for my 99 Intrigue 350 Cummins. The instructions call for hard wiring it since CC didn't make a harness for the VMS in 1999. It looks fairly simple, calls for five wires to be connected. I have mounted the monitor, but haven't hooked it up yet.
Has anyone done this installation themselves that could pass along some tips?
I asked CC for a wiring diagram for the specific engine harness to the dash board, but alas they have failed to respond. (what else is new) When you're out of warranty, you are on your own, right?

Thanks,

Larry

Intrigue 10762
Title: Re: Engine monitor
Post by: Maymr@bigfoot Com on June 14, 2003, 10:47:59 pm
Yahoo Message Number: 5141 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/5141)
Larry,
It has been my experience, and from what I have read in this group, CC has been very responsive to out of warranty owners... both first and second.
Give them another try.
Dick May

2002 Intrigue, #11438

"The problem with doing nothing is not knowing when you are finished."