Yahoo Message Number: 79782 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79782)
Hi All,
My high beam switch has stopped working on my 07 Allure. The switch will not change from high beam to low beam and it has stopped clicking. Has anyone replace the turn signal/high beam switch? Any ideas as to where to purchase the switch and how difficult is it to replace.
Thank you,
David
07 Allure 470
Yahoo Message Number: 79829 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79829)
Hi David,
Had a similar problem but I lost the headlights completely. Turned out to be the contacts inside the switch mounted inside the steering column. I was able to make repairs but it wasn't easy and I am not real confident that it will last so I purchased a new switch from Country Coach. It's easy to replace the switch as a whole. The covers on the steering column pop off. Just work the connectors (2) off the switch and remove a couple of screws. Reverse to install the new switch.
Here's the manufacturer and part number of mine. Not sure if yours is the same or not.
http://www.moenracing.com/images/Turn_signal_switch2.jpg (http://www.moenracing.com/images/Turn_signal_switch2.jpg)
Also you might check EBay and Amazon as I saw one there after I bought mine.
Good luck,
Barney
07 Inspire 52059
Yahoo Message Number: 79831 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79831)
David,
Just found this on EBay.
http://www.ebay.com/itm/Douglas-Autotec-DUG-TS012-Turn-Signal-Kit-/290512672108?item=290512672108&vxp=mtr (http://www.ebay.com/itm/Douglas-Autotec-DUG-TS012-Turn-Signal-Kit-/290512672108?item=290512672108&vxp=mtr)
Barney
07 Inspire 52059