Print Page - Reprogram leveling computer to have front end higher than level

Title: Reprogram leveling computer to have front end higher than level
Post by: Stan Canaris on June 03, 2012, 04:41:47 pm

Yahoo Message Number: 79849 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79849)

I am in the process of sealing all my joins on all slides, because of water leak. If I can make my level slightly higher in the front the water would not accumulate, but in fact run off the back. Does anyone know how to do this other than to use the manuel mode ?

Stan Inspire
2005 51406

Title: Re: Reprogram leveling computer to have front end higher than level
Post by: Jock Vargo on June 03, 2012, 08:55:00 pm

Yahoo Message Number: 79859 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79859)

Stan,

You can do this by using the manual part of the Power Gear system. If you don't have the write up, you can get how to use the manual mode online from Power Gear.

I could send you a copy if you want, let me know.

Jock Vargo
2005 Inspire
51428

Title: Re: Reprogram leveling computer to have front end higher than level
Post by: Jay Williams on June 04, 2012, 08:52:05 am

Yahoo Message Number: 79863 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/79863)

Stan, here is the information you are looking for. I did the same thing to direct the flow of water off the roof.
http://support.powergearus.com/techdocs/82-L0317-T.pdf (http://support.powergearus.com/techdocs/82-L0317-T.pdf)
Jay
51457

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Stan Canaris on June 03, 2012, 04:41:47 pm