Yahoo Message Number: 80489 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/80489)
Still having problems with water heater. I have replaced the t-stats, flushed out the tank, and replaced small inline capaciter. The water is not getting hot, only warm. Barely any warm water is getting to the galley. Any ideas?
Tom Coomes
2005 Inspire 51177
Yahoo Message Number: 80494 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/80494)
It may be the circulation pump.. does not keep the exchange tank even temp..
After 600 plus dollars of tech work. we discovered the problem..
Please call me and I can describe how to trouble shoot.
408-691-7541
Russ
05 Intrigue
11883
Yahoo Message Number: 86061 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/86061)
Question regarding hot water. I hooked city water up to our coach today and seem to have a problem with the water. I have good pressure on lavy, kitchen sink, and toilet. All on the cold side. I have no pressure from the hot side at all. I have the breaker off on the water heater, but shouldn't I still be getting water from the water heater even if it is cold? We also donot have any pressure, hot or cold in the shower. Any ideas
Tom
2005 Inspire 51177
Yahoo Message Number: 86062 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/86062)
Yahoo Message Number: 86067 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/86067)
Check the outside shower HW faucet is turned off. The shower head could be off, but the faucet being on can cause your symptoms.
Larry, 03 Allure, 30856
Yahoo Message Number: 86085 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/86085)
Thanks, the HW outside shower is off, and the water Heater bypass lever is in the right position. Any other ideas?
Tom
2005 Inspire 51177
Yahoo Message Number: 86088 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/86088)
I apologize if I missed this earlier, but have you pulled the elec heating element. My water was getting warm but not hot when running on elec. It was the heating element. The element was partially corroded. So, it was working, but at a reduced level. I couldn't tell this by diagnostic multi-meter checks, only by pulling the element and looking at it. Put a new one in and all is well.
Brian
Allure 30507