Yahoo Message Number: 80709 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/80709)
I have power shades over the windows in the DS living room slide and over the bedroom PS slide. Somehow they have become "jangled" and when I press the up arrow one goes up and the other goes down. I need to figure how to get them both going the same direction. The control runs both awnings and near as I can figure there is not an option to run just one awning. The awnings are Bruster and the control motors are Somfy. Anyone have any ideas?
-Dennis Holmes
12055 2006 Intrigue 530
Yahoo Message Number: 80714 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/80714)
I meant to say power awnings over the windows.
-Dennis Holmes
12055 2006 Intrigue 530
Yahoo Message Number: 80723 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/80723)
I figured it out. I found a junction box for one of the awnings behind a panel in the bedroom and disconnected power to that awning and was able to change the other one so they are in sync.
-Dennis Holmes
12055 2006 Intrigue 530