Yahoo Message Number: 81629 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/81629)
Has anyone taken one of these fan controllers apart? I have an ever so slight hydaulic fluid seep / drip coming from the bottom of the plunger assembly. It looks like there is a screw in plug and I'm wondering if I attempt to unscrew the plug, I will be able to reassemble. I'm also wondering what type of seal is there, (gasket, o-ring, copper washer?)
Any ideas?
Don Smith 2002 Intrigue #11430
Sauer Dafoss asm. #1092385 seal K26748 I think
Yahoo Message Number: 81630 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/81630)
Are you talking about the hex head cap at the end of the solenoid coil?
Dave
2000 Allure
#30444
Yahoo Message Number: 81631 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/81631)
Don
Been there. That hex cap has an O ring under it. Also one at the top of the coil. The hex nut has a very light torque spec. Same assy # on our Inspire Ned Herrmann
06 Inspire 51677
Yahoo Message Number: 81657 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/81657)
Yes, that is where I think the fluid seep is.
Don