Yahoo Message Number: 83553 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/83553)
Ours recently arc'd/sparked on the inside and I need to remove it. Can't for the life of me figure out how it's mounted but it is very secure.
Any ideas?
Jerry
2003 Magna Haven #6190
Yahoo Message Number: 83562 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/83562)
Generally there are two bolts on top, accesses through a cabinet or blind panel. Then there are mating J brackets on the back. It is heavy so you will want a helper and some sort of support below it.
Bob Wexler
SOB
Yahoo Message Number: 83563 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/83563)
Jerry,
Ours did that but it was only the rotating metal roller. We purchased a new one and it stopped the arcing that was happening every so often.
Dave
07 Country Coach Allure 430 #31495 12 Jeep GC Toad Mountains of So Cal
Yahoo Message Number: 83560 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/83560)
You can access the screws at the top inside the cabinet, than you can remove those screen filters at the bottom to loosen the anchor bolts from the back plate. Hope this helps..
Regards,
Dave
(Former CC Technician)
Styleworks RV Repair LLC
4763 Long St.
Sweet Home, OR
(541) 543-7983
daverjr4@...
Sent from my HTC EVO 4G LTE exclusively from Sprint