Yahoo Message Number: 84681 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/84681)
Our pioneer nav/screen seems to not let us see the cameras when in motion. It puts a note on the screen about being in motion, it functions fine when stopped and in park. Is there a way to change this? I sure would like to see whats behind me when backing up or whats in my lane when changing lanes!
We have an 06 magna
Yahoo Message Number: 84683 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/84683)
We had this happen when we replaced our Pioneer..
Turned out we had the rear camera cable plugged into the inbound tv signal port- not the camera port.
Might want to check the schematic to see if the solution is as simple as moving the line.
Good Luck,
Russ
05 Intrigue
11883
Yahoo Message Number: 84693 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/84693)
Our flip screen went out on our Magna and when we replaced it we had this problem so we put a rotary on-off-on switch inline on the ground wire. So now when the message comes up we turn the switch and everything works.
Hope this helps.
Tammy T
Magna 5605
Panama City, FL
Yahoo Message Number: 84696 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/84696)
Hu? You put a ground interrupt switch on the power supply side of the radio and just switch it ? Seems weird.
J