Yahoo Message Number: 88599 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/88599)
New to us 2007 Allure 470 Siskiyou Summit 42' High mount LED brake light quit working. Brake lights in the tail light assemblies work fine. Checked wiring to LED, good ground, light works fine if you jumper 12 v to it. It is obviously not getting 12v signal. No fuses blown. No obvious other wiring problems. Talked to Greg at CC and he said it was normally tied into the left tail light assembly. Tried jumper to that but since coach does not have separate turn signals, LED flashes with the left turn signal.
Bottom line, with a coach that shares turn sigs with brake light, the LED must have a separate source when brakes applied. I'm stumped and looking for any ideas.
Yahoo Message Number: 88604 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/88604)
Take a look at the tow board, they may have tied that light to the board or going to the board. It maybe on the output side of the brake circuity of the board and the fuse is blown?
Fred '01 Magna #5983