Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Travman100_4 on September 05, 2013, 11:19:18 pm

Title: Oil Reservoir handle
Post by: Travman100_4 on September 05, 2013, 11:19:18 pm
Yahoo Message Number: 91245 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/91245)
After my last oil change I discovered that the handle which is used to drain oil from the oil reservoir is missing. Does anyone know a part number that will work as a replacement or must I replace the entire valve with a new valve that has the handle.

Thanks.
Ray

2000 Intrigue 11040
Title: Re: Oil Reservoir handle
Post by: Rexwoods37 on September 05, 2013, 11:53:41 pm
Yahoo Message Number: 91246 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/91246)
Ray

Mine uses a regular 3/4 inch ball valve that you can buy at Home Depot. Mine is female threaded with two hose barbs screwed into it and held by two hose clamps Hope this helps.

Rex 2003 intrigue 115453
Title: Re: Oil Reservoir handle
Post by: Travman100_4 on September 06, 2013, 12:37:48 pm
Yahoo Message Number: 91259 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/91259)
Thanks, Rex. I am hoping that the Home Depot ball valve has a removable handle so that I can just buy the valve and remove the handle and put it onto my valve, I wouldn't want to try to change out the valve myself but I can probably do that if it becomes necessary.

Ray 2000 Intrigue 11040