Text only | Text with Images

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: D Strain on December 02, 2013, 07:18:26 pm

Title: Entry Step Controller
Post by: D Strain on December 02, 2013, 07:18:26 pm
Yahoo Message Number: 92701 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/92701)
Quote
Quote
My entry step does not move. I have not finished trouble shooting, but does anyone know if the magnetic switch in the door is in the closed or open position when the door is closed? Also does it pass 12 v or grnd? Any trouble shooting ideas are welcome. TIA
Quote
Dave, 96 CC Intrique
Title: Re: Entry Step Controller
Post by: Skpjose on December 02, 2013, 11:41:45 pm
Yahoo Message Number: 92703 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/92703)
We have a 98 Intrigue, switch is not magnetic, standard switch. Original switch was a NC (open when the door is closed). When I replaced the controlled Kwikee included a relay to change the switch input to a NO because they changed the controller. A NC switch is not that easy ti find so when i replaced the switch I replaced it with a SPDT snd used the NC contacts. If the relay evr goes "kaput" I'll use the NO side of the switch and remove the relay.

Judy n Joe 98 Intrigue 10578
Title: Re: Entry Step Controller
Post by: Scott on December 04, 2013, 11:22:28 am
Yahoo Message Number: 92736 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/92736)
Dave - I found a complete schematic for this circuit in my manual package. You might check there for those details.

Best - Scott

2006 Allure 430 40' #31349

(Bus-Stead Lemon) My Allure Page http://www.muniac.com/Allure%20Page.html (http://www.muniac.com/Allure%20Page.html)
Text only | Text with Images