Yahoo Message Number: 95618 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/95618)
Im still learning how to operate a lot of this stuff but I am concerned the compressor is not working correctly. When I push the level button with key on and engine off then try to raise front or rear manually the compressor runs but nothing raises. I have tried raising front or each side with the same results. If the engine is running and I push raise it will go up. Am I doing something wrong? Can I test the compressor for pressure and what should it be? I do hear air come from the unloader when the button is released.
Thanks for the help
Rod
Yahoo Message Number: 95619 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/95619)
http://www.hwhcorp.com/Air_Suspensions_and_HWH.pdf#page=34 (http://www.hwhcorp.com/Air_Suspensions_and_HWH.pdf#page=34)
page 5 might help.
Yahoo Message Number: 95620 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/95620)
PS..
we just left HWH factory in Moscow IA. They do have technical help however this time of year they might not be able to call you back for a few weeks. They said that you should always level the coach with engine running as it uses the engine air. The auxiliary compressor is only for re-leveling in sleep mode.
Lonny & Diane Livingston
'04 Allure #31065
Yahoo Message Number: 95624 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/95624)
The one thing that I don't understand is that the compressor runs even if the engine is running. It seems to level fine when running but I seem to recall that I could raise either end when not running by entering manual mode. It lowers fine in manual mode and the compressor runs it just dose not raise. Im trying to determine if there is even anything wrong since it may be just operator error.
Rod
08 magna