Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Gbconsta@att Net on December 14, 2014, 12:33:39 pm

Title: Generator slide adjustment
Post by: Gbconsta@att Net on December 14, 2014, 12:33:39 pm
Yahoo Message Number: 98750 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/98750)
I have a 2005 Magna. The generator slide seems to cause the front coach panel to close a little out of alignment with the opening in the front of the coach. Is there an adjustment that can be made to move the up/down, right/left positioning of the slide? Thanks in advance
Title: Re: Generator slide adjustment
Post by: Jrodneyrobbins on December 17, 2014, 01:38:56 am
Yahoo Message Number: 98775 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/98775)
Hello

On my 08 Magna the front fiberglass nose around the generator had around 6 or 8 bolts that could be adjusted for both height and offset. My nose was out of alignment when closed and also stuck out at the top about a 1/2 inch. I replaced a couple of the bolts with shorter ones and played with flat washers and got it perfect. Mine used 1/2 carriage bolts.