Print Page - CAT Monitor for C10

Title: CAT Monitor for C10
Post by: Kyteflyer_2000 on June 07, 2015, 04:52:12 pm

Yahoo Message Number: 101210 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/101210)

I have a CAT engine monitor in my dash. I got an error message about "No Data Communication Error" or something similar. A little while later it started working. I am thinking it is a dirty connection. I found the connector in dash. Does any know where it is connected to the engine? I am looking for the connector so I can clean it. Are there any other connectors.
My coach information books don't include any information about the CAT Monitor.

Thanks
Frank

2000 Magna 5766

Title: Re: CAT Monitor for C10
Post by: Driveit1955 on June 07, 2015, 10:17:01 pm

Yahoo Message Number: 101212 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/101212)

Hi Frank, we have a 2000 magna, it had the cat ID .Only work some times most not at all. Just replace it with a scangauge D.Call me if you want some info Charles 5886 828-2736099

Title: Re: CAT Monitor for C10
Post by: Mikey Drives on June 08, 2015, 09:19:14 am

Yahoo Message Number: 101217 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/101217)

It is connected to the engine ecu, ie computer.

Mikee

Title: Re: CAT Monitor for C10
Post by: MICHAELKENDIG on June 08, 2015, 05:43:55 pm

Yahoo Message Number: 101226 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/101226)

Call Eric Olstrom at Premier Motor Coach Service in Tucson, AZ. 877-624-2024.He is vary knowledgeable on CC products.
Mike Kendig

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Kyteflyer_2000 on June 07, 2015, 04:52:12 pm