Yahoo Message Number: 106923 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/106923)
Morning all. Last trip out our pac brake wasn't working. I don't think it is a mechanical issue but electrical. When I turn in the switch the light on the dash doesn't come on either. I have the schematics and want to know if anyone knows where the inline fuse would be? They show a fuse inline to the actuator not the switch. We have a 2000 CC Allure. Thanks.
Yahoo Message Number: 106926 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/106926)
I hate to keep drumming on this, but you don't have a floor mat holding the accelerator or the brake pedal open do you? Either one will put your PAC brake to sleep!!
Yahoo Message Number: 106954 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/106954)
The fuse is located in the under dash fuse box on drivers side, should be 2 fuse panels and is located in bottom panel. It is 20 amp and is shared with ac compressor control. works through a relay to supply pac-brake and ac compressor. If you are able to engage ac compressor clutch with ac controls the fuse is good.
David White 00 Allure 30349