Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Superbikeracer49 on July 06, 2016, 10:58:28 pm

Title: Basement door handles
Post by: Superbikeracer49 on July 06, 2016, 10:58:28 pm
Yahoo Message Number: 107008 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/107008)
Anyone know where i can find a replacement for 1 '99 Allure? One snapped off in my hand. Thanks all!
Title: Re: Basement door handles
Post by: Kevin Waite_1 on July 06, 2016, 11:54:44 pm
Yahoo Message Number: 107010 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/107010)
I may be able to get you replacements. Feel free to contact me if you are still in need.

Kevin Waite

541-953-6162 )Cell)
Title: Re: Basement door handles
Post by: Larry on July 07, 2016, 08:41:11 am
Yahoo Message Number: 107014 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/107014)
Trimark Corp
500 Bailey Ave.

New Hampton, Iowa 50659

Part no 060-0400

They sell thru eBay or Amazon can't remember Expensive but perfect replacement

99 CC Allure
Title: Re: Basement door handles
Post by: Superbikeracer49 on July 07, 2016, 07:43:37 pm
Yahoo Message Number: 107024 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/107024)
Kevin, Larry Thanks very much! I did manage to find them on eBay for $50. The handle was pretty hot from the sun and snapped off when I tried to pull it. I wouldn't mind replacing all of them just because they wear out and some are hard to open from missing bushings on the sides of the handle hinge. Looks like they're not fun either. Appears to be 40 or so rivets to drill out on the back panel to get to the nuts on the rear of the handle bezel to remove.

Paul

99 Allure
Title: Re: Basement door handles
Post by: Larry on July 07, 2016, 07:58:56 pm
Yahoo Message Number: 107025 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/107025)
I only had to remove about half the rivets and I could open the space enough to replace the handles.