Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: David@atkinsrotary.com on November 16, 2016, 01:20:23 am

Title: slide hydraulic ( hoses ) failures
Post by: David@atkinsrotary.com on November 16, 2016, 01:20:23 am
Yahoo Message Number: 108919 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/108919)
2008 intrigue blowing out the hoses for the slides many times. I am now working on a cure, since the factory will not help, even though I had them change all of the hoses........
Title: Re: slide hydraulic ( hoses ) failures
Post by: Robert McClernon on November 16, 2016, 10:39:16 am
Yahoo Message Number: 108924 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/108924)
If your hoses a blowing have a reputable hydraulic shop check your high pressure bypass valve, I have had that problem too

Robert Mcclernon
2000 intrigue
Title: Re: slide hydraulic ( hoses ) failures
Post by: Thomas W Insall Jr on November 16, 2016, 11:22:54 am
Yahoo Message Number: 108925 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/108925)
I would go see the guys at HWH in Moscow Iowa, they will find the solution, Guaranteed. TWI 2004 Intrigue 11731
Title: Re: slide hydraulic ( hoses ) failures
Post by: Daniel DeWolf on November 17, 2016, 08:51:04 am
Yahoo Message Number: 108930 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/108930)
I had hoses burst on my 06 Intrigue a couple of times. Both times was on the right rear. I took it to OMC and they installed a heat shield. It solved the problem.

Dan
SOB
Title: Re: slide hydraulic ( hoses ) failures
Post by: Lee Zaborowski on November 18, 2016, 07:51:48 am
Yahoo Message Number: 108946 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/108946)
I assume the heat shield went in front of the sync cylinder between the the cylinder and right tag tire. My 07 came with the shield. That was a DIY I did some years ago, I drilled a 100 vent holes in the shield. I'm assuming the hose failure was at the sync cylinder.

Lee (leozbrowski@... (leozbrowski@...)) VP Publications, CCI

2007 Country Coach Intrigue 12153
CAT C-13