Yahoo Message Number: 11476 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/11476)
Can anyone tell me how I can get my hands on a set of CC electrical drawings? I have auto CAD and a plotter I use in my hobby if someone has the drawings on a disk in AutoCAD or a PDF file.
Skip
==========
Get out your two binders and schematics especially the big foldouts and do some research first.
Tell us the solution rather than giving us a blow-by-blow account - we've been through it.
About 50% of the treads contain misinformation. Joe
Yahoo Message Number: 11477 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/11477)
I have a Dometic NDR1272 refregerator and ice maker, with two doors. The water line to the ice maker has apparently come loose where it connects to the back of the refregerator. It does not look like I can reach this area from the rear access panal that opens to on the outside of the coach. Has anyone accessed this area by removing the roof vent? Or will I need to pull the refregerator out from inside the coach. I know some people run wires for solar chargers though this space by removing the roof vent. If you have let me know how hard it was to remove the vent and what you could see back there.
Thanks
Calvin
1999 intrigue 10811
_
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush (http://promotions.yahoo.com/goldrush)
Yahoo Message Number: 11478 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/11478)
Calvin,
I too had an icemaker line leak. Mine was a split in the line that was not easy to see. I was able to cut out the bad part of line & splice in using supplies from Home Depot. Inspect that line carefully before you get too far. It may save you some time.
Hope this helps............
Steve
Intrigue #10673
Yahoo Message Number: 11481 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/11481)
Skip,
Trade your Newmar for a Country Coach.
Damon
electrical drawings? I have auto CAD and a plotter I use in my hobby if someone has the drawings on a disk in AutoCAD or a PDF file.
foldouts and do some research first.
we've been through it.