Yahoo Message Number: 12601 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/12601)
John
Here is the message I received from CC when I asked: How do I disconnect ALL loads from my house batteries so that when I equalize them at 15+ volts I will not damage other circuitry?
CC said: "In the battery bay locate wire # 47 (purple) and follow it to a Weatherpac Fuse Holder. remove the fuse and you will disable all of the loads and memory circuits in the coach that could be affected by the equalization charge.
Don't forget that after you complete the charge cycle you will have to reprogram all of your memory, clock and radio settings, circuits.
The 2 amp load you are seeing on the remote panel is the load created by the memory circuits."
Hope this helps.......
Joe
two
for