Yahoo Message Number: 12784 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/12784)
I got my keypad all set up ... Lazy Days called back and gave me the default CC authorizaion code and it works fine now. Didn't really want to mess with the master reset routine yet.
I now am wondering how I can shut off the loud 'chirp' when the alarm is enabled and disabled.
I can call Lazy Days, but they then have to call the factory since a lot of this stuff is new to them ... I thought I would query the experts here.
The docs I have do not cover this, at least not that I have found yet.
Reference the alarm selector ... I cannot find it anywhere. No panels or selector under the dash that I have found yet, but maybe I just have to look around more. The manual says "knee level, left side of steering wheel" allows interior motion and door, or just door. No mention of an 'off' setting. The schematics show a four position 'dip' switch on the control board, but do not mention how to set these other than the default settings.
I am calling TriMark Monday and requesting all the technical docs they will cough up. I hate not understanding how this stuff works.
Anyway ... thanks for any help.
John
2005 Affinity (most beautiful coach I have ever seen ... cost me 112 acres of farmland)
Yahoo Message Number: 12787 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/12787)
JOhn
My "alarm selector" is down next to and on the right side of the gas (diesel) pedal. Still need to find the "disable" button.
Larry, Debbie, Tiki and Tomi (Pugs) 2003 36' Allure #30856 w/370 ISL
the
alarm
a
yet.
I
to
112
Yahoo Message Number: 12795 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/12795)
The gentleman staying at the pad next to me also has a TriMark keyless system, but no keypad.
He got more docs with his than I did. His say to hit the unlock button four times with the ignition key on, but that does not work.
His system is dated mid '02, so things must have changed.
Also no mention of an override button in my docs so far, but his do mention an override button. Possibly another design change.
Thanks ...
John