Yahoo Message Number: 13182 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/13182)
Help!
I'm currently stuck at Cummins Atlantic, Richmond, VA. Our main air compressor went out and has been replaced. Now, When in "level" mode the air comes up to 120 psi as always but when I shift into "travel" the rear suspension bleeds down to 100 PSI (simultaneously on both sides). The air continues to bleed while the compressor tries to replace it. When the pressure drops to 100 PSI it stops bleeding when the engine is off.
This shop is not big on MH stuff. They mainly do trucks and are not familiar with HWH leveling systems. If we can't figure it out soon we may have to start paying rent here.
Any Ideas?
Bill Risser
717-341-2052
Yahoo Message Number: 13185 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/13185)
"bill_risser"
Give HWH a call immediately. They are very helpful. They will either diagnois the problem as theirs or send you in another direction. I've had nothing but good help from them. They are located in Iowa and open 8-5 Central time. Phone numbers are (800) 321-3494 or (563) 724-3396.
Hope this helps...........
Steve
Intrigue #10673