Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Brian Eichhorn_2 on September 03, 2009, 04:20:31 pm

Title: Ride height valves
Post by: Brian Eichhorn_2 on September 03, 2009, 04:20:31 pm
Yahoo Message Number: 51490 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/51490)
ygrps-yiv-1038957325 v0003a* {} ygrps-yiv-1038957325 v0003a* { } Anyone got a part number of the valves to fit the older coaches mine is a 95 and have a valve sticking at time it will not move up to ride height have to do it manually

Brian

95 intrigue
10030
Title: Re: Ride height valves
Post by: Ucdavisgsm on September 03, 2009, 10:00:29 pm
Yahoo Message Number: 51503 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/51503)
Brian- don't have the part# but you should be able to pull the part & have it matched at a Freightliner or similar shop. Haldex makes most of them, and you can probably match it off their website, maybe even from a few good photos. The valve part is the same for the most part, but the mounting mechanism changes to conform to various mounting needs. Here is a link, if it doesn't work then google Haldex Ride Height Valve, choose the Haldex link, go to Prducts, blah, blah...: http://www.haldex.com/en/North-America/Applications-Products/Product-categories/Brake--Suspension-Systems/Product-Information/Air-Suspension-Control-Systems-new/ (http://www.haldex.com/en/North-America/Applications-Products/Product-categories/Brake--Suspension-Systems/Product-Information/Air-Suspension-Control-Systems-new/) Mike
Title: Re: Ride height valves
Post by: Mike Cebula on September 07, 2009, 12:32:44 am
Yahoo Message Number: 51620 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/51620)
Brian,

My '95 is on a Gillig chassis and I sent their parts dept. an e-mail with my VIN number and year and asked about the ride height valves.

parts-sales@... (parts-sales@...)
Phone: 877-264-3700

For the front height control valve, the Gillig part number is 53-02125-001 - $61.22 each.
For the rear height control valves, the Gillig part number is 53-15022-001 - $90.00 each.

As I said, these are for my VIN and yours may be different.

Mike Cebula
'95 Magna 5266

brian eichhorn wrote:
Title: Re: Ride height valves
Post by: Richard Hanks on September 16, 2009, 08:11:06 pm
Yahoo Message Number: 51901 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/51901)
If your old valve's were Newway # 90554241 the replacement is the Halddex # 90555105. These are available at NAPA and most large truck repair shops

Richard

98 Magna #5531