Yahoo Message Number: 15013 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/15013)
Recently, there was some discussion of rinse ports becoming stopped up. I didn't have the problem, so I didn't pay too much attention.
Well, I do now and would appreciate some help from whoever had a solution.
Walt Rothermel
03Allure30811
Yahoo Message Number: 15017 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/15017)
Walt, thread #14686 is the one that discusses the Sani-Flush cleaning.
Bob
05 Intrigue LE #11872
stopped
attention.
Yahoo Message Number: 15021 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/15021)
Thanks, Bob. Steve seems to have the answer ( thread 14692 ), at least I hope so. I didn't know I had a manual for this system, but will take a good look.
Walt Rothermel
03Allure30811
Yahoo Message Number: 15025 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/15025)
I had this problem 2 or 3 times. Talked to some one at CC and they told me to take out sprayer and drill 1/8" holes in place of the small holes. I have done this and have not had any more trouble.
Knock On wood.