Yahoo Message Number: 15699 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/15699)
Here's a tip on by-passing the ignition kill circuit. I completely reworked my components and in the process I added a high-quality power strip. I plugged all of the component plugs into the power strip and tied them with wire ties to secure them.
If your model has only one 100v outlet with the 12v (ignition) cutoff, you can easily replace the receptacle with a conventional 110 wall outlet that will accommodate the power strip. Good luck.
Larry
Intrigue
10762