Yahoo Message Number: 18098 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/18098)
I changed out the plastic cover on the dump for the water heater with an anode type and have not had any success sealing it properly. I first uses pipe tape which leacked. Then I used so pipe thread sealer which has leaked. Any suggestions? Anything I could be doing wrong here? Thanks for the help.
Kary
05 Inspire 36'
#51499
Yahoo Message Number: 18117 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/18117)
I had a similar problem about a year ago. I went to a hardware store and purchased a pipe tap of the proper size (1/2" I think). I used the
tap to chase the threads being careful not to go too deep. It worked fine.