Yahoo Message Number: 18959 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/18959)
My cruise control will not release with a tap or hard push on the brake pedal - have to manually disconnect. Is there a sensor, solenoid or switch somewhere that ain't workin? Any ideas will be appreciated.
bojangles5169
'98 Intrigue
#10616
Yahoo Message Number: 18969 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/18969)
Check your stop lights. Sounds like the stop light switch activated by the brake pedal has gone bad. It should also disconnect when you activate the emerg flashers.
Rod Howes 2005 Inspire 51372
(http://us.i1.yimg.com/us.yimg.com/i/mesg/tsmileys2/29.gif) YOU CAN ALWAYS SPOT A WELL INFORMED MAN-- HIS VIEWS ARE THE SAME AS YOURS.
Yahoo Message Number: 18970 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/18970)
Not familar with your coach, nor do I have my schematics handy. I would suggest that you first check and see if you have brake lights.
That will determine if your brake light switch is working. If no brake lights, then suspect the brake light switch/sensor. From there I would think the signal would go to a cruise control sensor. Your schematics should reflect the location.
Jim Hughes
2000 Allure #30511
solenoid