Text only | Text with Images

Country Coach Owners Forum

Country Coach Restoration, Repair & Parts Forums => Country Coach Archive => Topic started by: Gwboard2000 on October 26, 2006, 11:40:05 pm

Title: Slideout rubber seals
Post by: Gwboard2000 on October 26, 2006, 11:40:05 pm
Yahoo Message Number: 26427 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/26427)
One of the vertical rubber seals on my front slideout is coming loose at the bottom.
About a foot of the seal goes in and out as the slide is retracted and extended. Does anyone have any experience with this problem?

George Board
`03 Allure 30871
Title: Re: Slideout rubber seals
Post by: Larry F on October 27, 2006, 09:27:11 am
Yahoo Message Number: 26430 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/26430)
Yes, I had that problem and I reattached it with silicone sealant.
Not sure if that's the right stuff, but it has held for more than a year.

Larry 03 Allure #30856

Quote from: gwboard2000
One of the vertical rubber seals on my front slideout is coming
loose at the bottom.

Quote
About a foot of the seal goes in and out as the slide is retracted
and extended. Does
Title: Re: Slideout rubber seals
Post by: Daledede11240 on October 27, 2006, 11:25:15 am
Yahoo Message Number: 26433 (http://groups.yahoo.com/neo/groups/Country-Coach-Owners/conversations/messages/26433)
Quote from: gwboard2000

> One of the vertical rubber seals on my front slideout is coming loose
at the bottom.

Quote
About a foot of the seal goes in and out as the slide is retracted
and extended. Does

Quote
anyone have any experience with this problem? >

George Board
`03 Allure 30871
I had this problem on my 2001 Intrigue. CC calls this a sweep seal.
Mine was replaced at a rally--part was about $50, but there was considerable labor involved. They used a large jack to hold the slide room up, then removed the old seal and installed the new one.
Dale Loop

Intrigue 11240
Text only | Text with Images