Skip to main content ↑ ↓
Topic: Air purge (Read 645 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Air purge

Yahoo Message Number: 82660
ygrps-yiv-912257704 v0003a* {} Having trouble with my dryer not purging any more. Does any one have an opinion as to what the problem is. This is a 95 Intrigue 300 Cummins. I think the govenor has quit.

Thanks

Brian 95 intrigue
10030

FREE Animations for your email - by IncrediMail Click Here!
?

Re: Air purge

Reply #1 –
Yahoo Message Number: 82677
You need to service the dryer every couple years. There are kits available with the cartridge and purge valve for around $100.
Find the part number on yours and check with Napa or any truck parts place, or go to any shop. They can service it for $200-$300.

Bob Wexler
SOB

On Sep 26, 2012 5:31 PM, "Brian Eichhorn" wrote:
Having trouble with my dryer not purging any more. Does any one have an opinion as to what the problem is. This is a 95 Intrigue 300 Cummins. I think the govenor has quit.

Thanks

Brian 95 intrigue
10030

FREE Animations for your email - by IncrediMail Click Here!
?
 

Re: Air purge

Reply #2 –
Yahoo Message Number: 82695
Brian I cannot talk to Cummings, but, for CAT Bendix has remanufactured filters which are much cheaper and per Bendix equal in quality. The purge valve is also something that needs to be replaced. There used to be rebuild kits for the purge valve but Bendix no longer offer the rebuild kit and you must replace the valve. Bendix strongly recommends against using non Bendix parts but I don,t know if that is just protecting the turf. After many years of patronizing NAPA, I no longer believe that they are consistently the value leader. Also, the purge valve does not have to be replaced as often as the filter. I replaced my filter after four years and the purge valve afterf 6 years. Neither was exhibiting any signs of failure but I wanted to replace them on my schedule not when they failed. Dan 2006 Allure 31348