Skip to main content ↑ ↓
Topic: Gauge stopped working (Read 670 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Gauge stopped working

Yahoo Message Number: 92054
Noticed on the trip that we are on, that the Trans Temp gauge has stopped working. I will first clean the contact's at the dash to see if that helps. Then move to the trans and see if I can determine what I can clean there. My Silverleaf unit is working and the temp for the trans does show on the screen.
While on the subject of the Silverleaf, as it scans the different systems, it does not register some of the systems that it scans. How does one check to see if something is wrong, or that system it not hooked up to that portion of the big picture of scanning. Example : Intake air Temp, Road Temp and Fuel Temp. Thanks
Dave
07 Country Coach Allure 430 #31495
2 Jeep GC Toad
Mountains of So Cal
Dave & Jodi
2007 CC Allure 40’ Tag #31495
2012 Jeep GC
Big Bear Lake, Ca & Henderson, Nev
 

Re: Gauge stopped working

Reply #1 –
Yahoo Message Number: 92056
Dave,


On my CAT and Allison trans the sensor is connected on the bottom front of the trans. I have had it slip off before. I would start with this connection first.


Jock Vargo

2005 Inspire
51428