Skip to main content ↑ ↓
Topic: Location of power gear module 500630S (Read 1820 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Location of power gear module 500630S

Yahoo Message Number: 107762
I need help locating this module in my 2005 siena quad slide. Any help will be welcome.

Re: Location of power gear module 500630S

Reply #1 –
Yahoo Message Number: 107765
Is that the printed circuit board. If so it can be repaired. The only part that needs replacement is the resettable fuse. The other parts are almost indestructible.

Mike Gunn

2006 Inspire # 51808

Re: Location of power gear module 500630S

Reply #2 –
Yahoo Message Number: 107772
Mike: I do not know if pc board is bad or not, I just cannot locate it in, on, or under the coach. If you can tell where to look for it sure would be a big help. Thanks, Ken

2005 Inspire Siena Quad Slide # 51430

On Saturday, August 20, 2016 11:18 AM, "Mike Gunn mlgunn1@... [Country-Coach-Owners]"  wrote:

Is that the printed circuit board. If so it can be repaired. The only part that needs replacement is the resettable fuse. The other parts are almost indestructible.

Mike Gunn

2006 Inspire # 51808

Re: Location of power gear module 500630S

Reply #3 –
Yahoo Message Number: 107775
Try in the cabinet under the control panel.

----- Original message -------- From: "Kenneth Umsted kcumsted@... [Country-Coach-Owners]" Date: 8/20/2016 2:29 PM (GMT-08:00) To: Country-Coach-Owners@yahoogroups.com Subject: Re: [Country-Coach-Owners] Location of power gear module 500630S

Mike: I do not know if pc board is bad or not, I just cannot locate it in, on, or under the coach. If you can tell where to look for it sure would be a big help. Thanks, Ken

2005 Inspire Siena Quad Slide # 51430

On Saturday, August 20, 2016 11:18 AM, "Mike Gunn mlgunn1@... [Country-Coach-Owners]"  wrote:

Is that the printed circuit board. If so it can be repaired. The only part that needs replacement is the resettable fuse. The other parts are almost indestructible.

Mike Gunn

2006 Inspire # 51808

Re: Location of power gear module 500630S

Reply #4 –
Yahoo Message Number: 107777
Well I am still on the hunt for that hidden control box (module 500630) which controls the auto leveling. So far none the clues have been correct. I guess I will continue the hunt this morning and hope for more help. Ken

2005 Siena 36' Quad Slide #51430

On Saturday, August 20, 2016 7:17 PM, "Ray O cnrllc@... [Country-Coach-Owners]"  wrote:

Try in the cabinet under the control panel.

----- Original message -------- From: "Kenneth Umsted kcumsted@... [Country-Coach-Owners]" Date: 8/20/2016 2:29 PM (GMT-08:00) To: Country-Coach-Owners@yahoogroups.com Subject: Re: [Country-Coach-Owners] Location of power gear module 500630S

Mike: I do not know if pc board is bad or not, I just cannot locate it in, on, or under the coach. If you can tell where to look for it sure would be a big help. Thanks, Ken

2005 Inspire Siena Quad Slide # 51430

On Saturday, August 20, 2016 11:18 AM, "Mike Gunn mlgunn1@... [Country-Coach-Owners]"  wrote:

Is that the printed circuit board. If so it can be repaired. The only part that needs replacement is the resettable fuse. The other parts are almost indestructible.

Mike Gunn

2006 Inspire # 51808

Re: Location of power gear module 500630S

Reply #5 –
Yahoo Message Number: 107778
Found this from another post:

"In our '06 Dyansty, the module you may be looking for is located in that tunnel you are talking about that leads from the front to the rear of the coach, under the floor, between the frame rails. I had to remove the "ceiling" in the pass-thru storage bay to access the unit. I am attaching three pictures I took of the PowerGear module, in that location. It is mounted somewhere, on a surface that is supposed to exactly match the slope, left to right as well as front to back, of the coach, since it contains the mechanism that determines if the coach is level. That's why they mount it in a place that is solid and not easily accessed or disturbed by accident."

and from another post on the same thread: "my Country Coach

Inspire had the same type of control box in the 2nd or 3rd bay, above the ceiling material, in the bay between the rails." ___

Link to the post which had pictures: http://www.irv2.com/forums/f115/locating-powergear-control-box-178840.html

Lonny & Diane Livingston
'04 Allure #31065

Re: Location of power gear module 500630S

Reply #6 –
Yahoo Message Number: 107779
The search is over, it just where you said it is. I removed the ceiling of the side area and found it. Now I can find out what is wrong with the leveling system. Thank ya, thank ya.

Ken Umsted

2005 Inspire Siena 36' Quad Slide

On Sunday, August 21, 2016 9:56 AM, "sdlivingston48@... [Country-Coach-Owners]"  wrote:

Found this from another post:

"In our '06 Dyansty, the module you may be looking for is located in that tunnel you are talking about that leads from the front to the rear of the coach, under the floor, between the frame rails. I had to remove the "ceiling" in the pass-thru storage bay to access the unit. I am attaching three pictures I took of the PowerGear module, in that location. It is mounted somewhere, on a surface that is supposed to exactly match the slope, left to right as well as front to back, of the coach, since it contains the mechanism that determines if the coach is level. That's why they mount it in a place that is solid and not easily accessed or disturbed by accident."

and from another post on the same thread: "my Country Coach

Inspire had the same type of control box in the 2nd or 3rd bay, above the ceiling material, in the bay between the rails." ___

Link to the post which had pictures: http://www.irv2.com/forums/f115/locating-powergear-control-box-178840.html

Lonny & Diane Livingston
'04 Allure #31065
 

Re: Location of power gear module 500630S

Reply #7 –
Yahoo Message Number: 107780
Has country coach ever made the build prints available to help finding items such as these easier?

Mark

07 Inspire