Skip to main content ↑ ↓
Topic: Koni Shocks and Ride Height (Read 778 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Koni Shocks and Ride Height

Yahoo Message Number: 12888
Had the shocks adjusted to maximum and ride height checked. Is was low on both ends, raised to standard. Should help bottoming out problems on bridges. Have not checked it out on a good bump, but it drives well. Thanks for the previous posts about ride height adjustment, found the correct height in the file area. John 2002Allure
#30702

Re: Koni Shocks and Ride Height

Reply #1 –
Yahoo Message Number: 12889
Quote
Had the shocks adjusted to maximum and ride height checked. Is was >low on both ends, raised to standard. Should help bottoming out >problems on bridges. Have not checked it out on a good bump, but it >drives well. Thanks for the previous posts about ride height >adjustment, found the correct height in the file area. John
As I understand it, the term 'shock absorber' is really a misnomer since their main purpose is to dampen oscillation/sway after hitting a disturbance in the road. I think that most of the shock/bump absorption is done by the air bags and the tires. Maybe someone more knowlegeable can enlighten us??
Tom Fisher
Dallas, TX

Re: Koni Shocks and Ride Height

Reply #2 –
Yahoo Message Number: 12891
From: "TBooneFisher" tboonefisher@...> (snip) > As I understand it, the term 'shock absorber' is really a misnomer

since their main purpose is to dampen oscillation/sway after hitting a disturbance in the road. I think that most of the shock/bump absorption is done by the air bags and the tires. Maybe someone more knowlegeable can enlighten us??

You understand it correctly. And, while Americans have used the term "shock absorber" for many years, the Brits call them "dampers" ... which describes their function much better than "shock absorber."
But don't ask me why they use the terms "bonnet" and "boot" for "engine hood" and "trunk lid."

Dick (& Geri) Campagna
'98 36' Intrigue #10571
Mfd: 11/97
 

Re: Koni Shocks and Ride Height

Reply #3 –
Yahoo Message Number: 12905
Glad the ride height data in the files section was of help.

Jim Hughes, KC4FWS
2000 Allure #30511

Quote from: countryjrc
Had the shocks adjusted to maximum and ride height checked. Is

was

Quote
low on both ends, raised to standard. Should help bottoming out > problems on bridges. Have not checked it out on a good bump, but

it