Skip to main content ↑ ↓
Topic: cabinet hardware (Read 590 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

cabinet hardware

Yahoo Message Number: 50844
A few weeks back there was a post about the cabinet catches, the ones that have two ball bearings in them. I can't locate that post and it had a link to a supplier that you could buy these things from. Can anybody help me locate that post.

Thanks

Re: cabinet hardware

Reply #2 –
Yahoo Message Number: 50848

Jim,

Matt Carr here, former plant manager in the cabinet shop at Country coach. Almost 90 % of the time the catches just need adjusted. There is a standard screw in each end of the catch portion that is attached to your faceframe. Try tightening that first. If that doesn't work let me know. I know the make and model #. I would have to go to my shop to look it up. Try the adjustment first.

Matt

cabinet hardware

Reply #3 –
Yahoo Message Number: 50857
Jim had t replace a few of my catches, found them a my local lumber co. about $4 each.
Bill 51166
 

Re: cabinet hardware

Reply #4 –
Yahoo Message Number: 50859
Thanks for the answers guys.

Matt, I know about the adjustment, but some of mine have missing ball bearings. We are at a rally in Harrisburg right now and will be going over to the Guaranty service "campground" on Sun. afternoon, have a service appt. on Mon.