Skip to main content ↑ ↓
Topic: Adding Side View Cameras To Intec (Read 582 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Adding Side View Cameras To Intec

Yahoo Message Number: 80990
Looking for someone to share how they added side view cameras to their Intec system.

Digger Graves
1999 Magna 5723
2008 Yellow Jeep
 

Re: Adding Side View Cameras To Intec

Reply #1 –
Yahoo Message Number: 80996
Yes, I added a passenger side camera. Get the parts from Intec. Before you do anything, get under the dash and check out where, from INSIDE, you will mount the camera. If you go too low, you will be beneath the floor and will have a hard time running the cable. I went as low as I could staying above the floor. Make sure on your coach that corresponds to a flat area the camera housing can mount to. I used Sikiflex to glue it to the gelcoat. Clean with alcohol good to remove wax.

Hope that helps

Al Colby

2000 Intrigue 10979