Skip to main content ↑ ↓
Topic: How is the roof on an inspire constructed? (Read 562 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

How is the roof on an inspire constructed?

Yahoo Message Number: 80991
Hi everyone

I am thinking about doung some upgrading to the antennna and sat doom and was wondering how the roof were constructed. I dont want to drill into a structural member. Also on the roof there is a sticker that says something like sat location. The spot wasnt used so i am wondering what is there that i might use for an upgrade.
Thanks

Rod

05 inspire

Re: How is the roof on an inspire constructed?

Reply #1 –
Yahoo Message Number: 81021
country coach told me the roof was buily with solid styren c and cd to shape. they then aplied the fiberglass top and luan bottom and vulcanized the whole sandwich at once.
 

Re: How is the roof on an inspire constructed?

Reply #2 –
Yahoo Message Number: 81023
Rod,

That sticker shows where the coax is for the sat dish. Most installers don't use it because the location has been known to be elsewhere. So the installer will use his own cabling which I agree with. That way, he is responsible for the complete installation instead of relying on someone else's work. The metal structure is no where near the surface of the roof so you won't be hitting one. Noo big dael if yo do, just go ahead and screw into it.

Don

'02 Intrigue #11427
'02 Intrigue #11427