Skip to main content ↑ ↓
Topic: Another Affinity question .. (Read 1172 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Another Affinity question ..

Yahoo Message Number: 14813
Does anyone know where the circuit board is that allows you to configure the trailer plug ... four wire to five wire ?? This is a way cool feature if I could only find the jumper.
The book says it is in the engine compartment near the engine cut off switch, but of course it is nowhere to be found. So much for CC manuals. We tried to trace the wiring harness from the trailer socket, but it disappears into the framework.
I would think they would default to a four wire system, as this must be what most people require I would sure think.

Calling Lazy Days tommorow, but they won't know either.

Thanks ...
John

2005 Affinity #6453

Re: Another Affinity question ..

Reply #1 –
Yahoo Message Number: 14819
John:

Don't know the location on your specific coach, but we have our second '04 Intrigue, and both had this little bugger in the fuel filter bay.
One was screwed to the top of the bay and was quite difficult to remover the panel to get to the jumper. The other was on the rear wall of the bay and was relatively easy to access. Don't look for an exposed circuit board, as I'm sure all are covered with a (probably white) panel that is about 3/4" thick (the offset bends to form around the board). Good luck.

Roger Uhlich

2004 Intrigue 11699

In Country-Coach-Owners@yahoogroups.com, "John Keene" wrote:

Re: Another Affinity question ..

Reply #2 –
Yahoo Message Number: 14820
Quote from: John Keene
Does anyone know where the circuit board is that allows you to > configure the trailer plug ... four wire to five wire ?? This is a > way cool feature if I could only find the jumper.

The book says it is in the engine compartment near the engine cut

off

Quote
switch, but of course it is nowhere to be found. So much for CC > manuals. We tried to trace the wiring harness from the trailer > socket, but it disappears into the framework.

I would think they would default to a four wire system, as this

must

Quote
be what most people require I would sure think.

Calling Lazy Days tommorow, but they won't know either.

Thanks ...

John

2005 Affinity

#6453

JOHN, I got one are Wal-Mart. Did it at the plug 5 wire to 4 wire. it workes just fine, about $9 to 10 dollars. CAPT. DAN 2000 ALLURE #34098 PS THIS IS A PLUG THAT FITS RIGHT INTO YOUR CCI. PLUG GOOD LUCK

Re: Another Affinity question ..

Reply #3 –
Yahoo Message Number: 14822
Quote from: dmgelaine_02
>

[quote author=John Keene"

>

> Does anyone know where the circuit board is that allows you to > > configure the trailer plug ... four wire to five wire ?? This is

a

Quote
way cool feature if I could only find the jumper.
>

> The book says it is in the engine compartment near the engine

cut

Quote
off

> switch, but of course it is nowhere to be found. So much for CC > > manuals. We tried to trace the wiring harness from the trailer > > socket, but it disappears into the framework.
>

> I would think they would default to a four wire system, as this > must

> be what most people require I would sure think.
>

> Calling Lazy Days tommorow, but they won't know either.
>

> Thanks ...
>

> John

> 2005 Affinity

#6453

Quote
>

JOHN, I got one are Wal-Mart. Did it at the plug 5 wire

to

Quote
4 wire. it workes just fine, about $9 to 10 dollars. CAPT. DAN > 2000 ALLURE #34098 PS THIS IS A PLUG THAT FITS RIGHT INTO YOUR > CCI. PLUG GOOD LUCK also have it the other way two.4 wire to 5

wire

Re: Another Affinity question ..

Reply #4 –
Yahoo Message Number: 14824
John, in our 05 Affinity the box is in the last bay on the passenger side. It is a black box near the oil reservoir. No extra parts needed to change from 4 to 5, its pretty easy to do. Dale Hollick 05 Affinity #6370

Re: Another Affinity question ..

Reply #5 –
Yahoo Message Number: 14827
Quote from: Candace and Dale Hollick\[br\
] > John, in our 05 Affinity the box is in the last bay on > the passenger side. It is a black box near the oil > reservoir. No extra parts needed to change from 4 to > 5, its pretty easy to do. Dale Hollick 05 Affinity #6370
Good deal, thanks a bunch. Didn't think to look there. The pic shows one jumper, pretty clever set up.

John

Re: Another Affinity question ..

Reply #6 –
Yahoo Message Number: 14828
Quote from: Candace and Dale Hollick\[br\
] > John, in our 05 Affinity the box is in the last bay on > the passenger side. It is a black box near the oil > reservoir. No extra parts needed to change from 4 to > 5, its pretty easy to do. Dale Hollick 05 Affinity #6370
Good deal, thanks a bunch. Didn't think to look there. The pic shows one jumper, pretty clever set up.

John

Re: Another Affinity question ..

Reply #7 –
Yahoo Message Number: 14879
John,

Our control box for the hitch and car lights is in the filter compartment, which is a great location compared to our 01 which was in the engine compartment. Look in your last door on the passenger side.

Bill G. 05 Magna #6425

Re: Another Affinity question ..

Reply #8 –
Yahoo Message Number: 14881
Quote from: gablerwh@a\.\.\.

John,

Our control box for the hitch and car lights is in the filter

compartment,

Quote
which is a great location compared to our 01 which was in the

engine

Quote
compartment. Look in your last door on the passenger side.

Bill G. 05 Magna #6425
Yep, found it, changed the jumper, and all is well. Had a connection problem on the Honda, but fixed that too.

Thanks ...

John and Terry

2005 Affinity #6453
 

Re: Another Affinity question ..

Reply #9 –
Yahoo Message Number: 14921
Quote from: John Keene
Does anyone know where the circuit board is that allows you to > configure the trailer plug ... four wire to five wire ?? This is a > way cool feature if I could only find the jumper.

The book says it is in the engine compartment near the engine cut

off

Quote
switch, but of course it is nowhere to be found. So much for CC > manuals. We tried to trace the wiring harness from the trailer > socket, but it disappears into the framework.

I would think they would default to a four wire system, as this

must

Quote
be what most people require I would sure think.

Calling Lazy Days tommorow, but they won't know either.

Thanks ...

John

2005 Affinity #6453
John, I'm sure you have found it by now, but......it is in the curb side bay with your fuel filters etc at the rear of the coach, and behind a metal panel cover which is attached with Velcro