Skip to main content ↑ ↓
Topic: Inverter problems (Read 1520 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Inverter problems

Yahoo Message Number: 92068
The lights on the invertor panel are going crazy flashing on and off. I just plugged into electric after trying to start the generator. Before that every thing seemed to be ok. What should I do? the invertor it self looks ok the invert/wet light is blinking the charge/gel is on the other two are off. It is a Xantrex Freedom 458.I am in Yuma, AZ and do not know who to call.

Re: Inverter problems

Reply #1 –
Yahoo Message Number: 92069
That happened to me once. I just unplugged the remote and turned off the breaker to the inverter for a min or two then hooked it back up and its been fine since

Steve & Jane

1998 Intrigue

#10557

______

Re: Inverter problems

Reply #3 –
Yahoo Message Number: 92071
Mine did that one winter. I disconnected the batteries then reconnected them and everything went back to normal.

Kevin Burns

2000 affinity 5865

Sent from my mobile Phone

Lee Zaborowski leozbrowski@...> wrote:

Re: Inverter problems

Reply #4 –
Yahoo Message Number: 92081
Thanks to all of you that gave ideas on what to do about my inverter. In the end it had to be reset, would have been nice if there had been a reset button. Thanks again.

--

~Dixie~

Re: Inverter problems

Reply #5 –
Yahoo Message Number: 92086
The panel in our National Tropical used to do that every now and again. I would simply reboot the panel by disconnecting the panel at the inverter for 10 seconds or so. Worked every time.
David White

06 Intrigue 11993

Re: Inverter problems

Reply #6 –
Yahoo Message Number: 92088
When I have had a similar problem I just unplug the cord from the remote monitor panel socket, at the inverter looks like a phone cable, and count to 10 and plug back in.

Ray O'Connell

They say wine improves with age! As I enter my golden years, I say age improves with wine! The Born Loser