Skip to main content ↑ ↓
Topic: Emergency stop engine Switch? (Read 711 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Emergency stop engine Switch?

Yahoo Message Number: 78455
I am having a problem getting started, after setting for a few months, my chassis batteries were low, I fooled around with the emergency switch, and now am not sure how it should be reset? Is is supposed to be pushed in, or pulled Out? Too, I do not seem to have fuel pressure, I cannot hear the fuel pump running, does it have a fuse or some way to check out what the problem may be? All help appreciated.
07 Allure #31459, 400 cummings.

Re: Emergency stop engine Switch?

Reply #1 –
Yahoo Message Number: 78456
Marvin:

Emergenvy Stop Switch in Engine Compartment is reset when it is "Pulled Out"

Kevin Waite
541-953-6162

Re: Emergency stop engine Switch?

Reply #2 –
Yahoo Message Number: 78463
If it's the same as mine nothing at all will work with it pushed in . Not even the Silver Leaf. To reset mine you have to turn it to get it to pop out.
On two occasions service techs have knocked it in. The first time I had to pay to figure out why it wouldn't start. The second time, a few weeks back, I was there when they knocked it in while the motor was running. But they had no idea what had happened!!!

Bruce

2001 Intrigue #11278

Emergency stop engine Switch?

Reply #3 –
Yahoo Message Number: 78500
Color me thick headed on this one . . . do I have one in the CAT powered Inspire?
Lon

'06 Inspire