Skip to main content ↑ ↓
Topic: Screen for door replacement (Read 874 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Screen for door replacement

Yahoo Message Number: 105212
On the front door screen, there is a roller that rolls the screen up and down. It seems this is starting to stick and the screen no longer rolls up. It looks like it is bolted on but the roller mechanism seems sealed. Any idea where I can find one of these?

Mark and Denise
07 Inspire 51985

Re: Screen for door replacement

Reply #1 –
Yahoo Message Number: 105238
Mark,

The screen mechanism can easily be removed and taken apart but be careful with it as they are no longer being manufactured. Four Phillips screws hold it in place in the door. Remove those and the screen can be removed by sliding the unit up and out. Two square drive screws, one on each side, will allow the unit to be taken apart. There is spring tension on one side so be careful it will try to twist. It can be done.

Barney

07 Inspire 52059

---In Country-Coach-Owners@yahoogroups.com,  wrote :

On the front door screen, there is a roller that rolls the screen up and down. It seems this is starting to stick and the screen no longer rolls up. It looks like it is bolted on but the roller mechanism seems sealed. Any idea where I can find one of these?

Mark and Denise
07 Inspire 51985

Re: Screen for door replacement

Reply #3 –
Yahoo Message Number: 105250
There are guides that have come loose that attach to the screen. I can see them resting in the bottom of the frame. Trying to find a complete new screen door replacement. No luck so far.

Mark

On Mar 22, 2016 1:05 PM, "Mark" mx30mark@...> wrote: