Skip to main content ↑ ↓
Topic: Sharp Convection Microwave Removal? (Read 1472 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: Sharp Convection Microwave Removal?

Reply #1 –
Yahoo Message Number: 109170
Hey Rich,

My Sharp in my 2002 Affinity was going strong when I upgraded to the newest stainless version a few months back, Sharp R1874T Microwave Oven, which I purchased online from Office Depot on sale. It is a direct fit, in fact, I did not even need to change out the mounting plate. New one mounted directly in to old mounting plate.

Four bolts total. Open doors above microwave, lift shelf liner felt and you will see the two that screw in from top. Take off the aluminum rectangular filter screens on bottom side of micro and you will see phillips headed bolts angled back and upwards (these have retaining pins and don't pull all the way out). The mounting plate is on the back wall and has a lip on bottom edge that microwave slides in to. Take four bolts loose, drop front of micro a bit, and lift back of micro out of groove....

Keith

02 Affinity #6123

On Monday, December 12, 2016 7:31 PM, "RICHARD BARLOW rich_barlow@... [Country-Coach-Owners]"  wrote:

left

left

left

Re: Sharp Convection Microwave Removal?

Reply #2 –
Yahoo Message Number: 109171
I also did the Samsung stainless fridge at the same time.....happy with both, love this coach!