Re: Awning sensor not working
Reply #1 –
Yahoo Message Number: 111503
I have fought with these awnings many times, and they won... I think my wind sensors are ok, but the ZipDee patio awnings will open and close on their own, like ghost operation... I just turn the power switch off after I have them where I want them. I talked to a ZipDee tech guy, and he said their are many radio signals that will trigger them. I think perhaps Bluetooth, or inverter Xanbus signals, even a trucker going by with CB -- any of these signals can trigger the awning to go in/out on it's own. My rear awning is more of the culprit, the front one is ok, so I don't know why that would be, but I have given up fighting them. I just turn off power switch after extend/retract. Also be darn sure they are retracted well and power switch off before traveling in the coach. I have heard of horror stories where they have started to open going down the road. Sorry I don't have better news. If you do hear of a solution to this, please post.
Greg
06 Magna 6642