Skip to main content ↑ ↓
Topic: ATC/ABS lights and codes (Read 871 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

ATC/ABS lights and codes

Yahoo Message Number: 114452
My ATC light is flashing and my ABS light is on. My Silverleaf is showing "14 4 1 Axle 1+2 low voltage". Anyone know what this means and what I need to do to fix it? This is not just because my tag was up. It's not going away.

Rich 2002 Magna

Re: ATC/ABS lights and codes

Reply #1 –
Yahoo Message Number: 114454
I had ABS issues. Went to Sacramento Truck Service, they replaced tag sensor.
ABS light still on. They then replaced ABS cable - ABS light off.
Many hours labor, had to remove bay ceilings. Good thing extended warranty paid.
Good luck, Kent 05 Allure. 31281

Re: ATC/ABS lights and codes

Reply #2 –
Yahoo Message Number: 114464
I spoke with Meritor/Wabco today. Guy said this is very common and results from the sensors not being close enough the ABS wheel thing as things wear. A few thousands of an inch is all it takes. He said there's a little cap you remove and you simply press in on the sensor to move it into contact again. Of course it could also be wiring. It would seem as if axles 1 and 2 are probably the steer axles and I have disc brakes up there. I haven't gone to take a peek due to high winds but I will soon.

Rich 2002 Magna