Skip to main content ↑ ↓
Topic: Sewer Flush (Read 1309 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Sewer Flush

Yahoo Message Number: 2007
I will keep this short for the gentleman with the 1998 Intrigue.
Remove the fiberglass trim between the gray and black water valve.
Look up and slightly to the right. You will see the flush nozzle on the black tank held with stainless steel screws. Remove the water fitting on the nozzle, unscrew the screws, and carefully pry off the nozzle. Once clean, put a bead of GE silicone on the backside of the nozzle and reinsert the screws. DO NOT OVERTIGHTEN. Some silicone will ooze out. Put a light bead of silicone on the outside of the nozzle and smooth out. Let the silicone dry and reinstall the water supply line.

I have a 1998 Intrigue.

Other models have the nozzle mounted in the tank all the way across to the passenger's side of the coach. If this is the case, there is another issue of removal. I have done both.

Fred Sage 1998 Intrigue

Re: Sewer Flush

Reply #1 –
Yahoo Message Number: 2011
Quote
Fred Sage 1998 Intrigue,
My Intrigue came off the production line in July of 1998. The flush valve is on the right side(opposite drain valves) of the black tank.

Thanks for your help.............Steve '98 Intrigue