Skip to main content ↑ ↓
Topic: Slide Will Not Go In (Read 423 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Slide Will Not Go In

Yahoo Message Number: 44123
Bill,

Before you start throwing parts at your slide problem, I think Circuit #21 is your issue. Make a short jumper wire from a clean ground to the interlock switch in your front left compartment. I think the switch with #21 is the middle one. There will be three round switches in a row. You can use a couple of alligator clips. I think over time that switch has lost ground. All you may have to do is back off the hexnut, clean the area and tighten the switch. Do a "Search" for message 35683.

Fred Sage '01 Magna #5983