Skip to main content ↑ ↓
Topic: Xantrex Panel Not working (Read 768 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Xantrex Panel Not working

Yahoo Message Number: 66946
My Xantrex panel that controls the inverter and such, has gone dead. It seems like a fuse, but I have no idea where to look, being new to the rig. Any help is greatly appreciated.

Happy New Year!

--jjc 2007 Inspire 52066

Re: Xantrex Panel Not working

Reply #1 –
Yahoo Message Number: 66954
if the inverter is still working and the lights on it are ok try unplugging at either the inverter or the back of the panel.
You coudl have either a bad/failed cable or a bad panel. We had the remove on ours go out a couple of years ago and had to replace it.

Re: Xantrex Panel Not working

Reply #2 –
Yahoo Message Number: 66960
On the Xantrex 2000 Monitor I installed in our rig, there is a fused wire running to the house battery positive terminal to power the meter. If that fuse fails, no power at the meter. (My meter remains on with the House Battery disconnect switch is off.)

Dean

95 Magna 5280
 

Re: Xantrex Panel Not working

Reply #3 –
Yahoo Message Number: 66965
Mine was dead when new. Turned out to be a circuit board inside the inverter box. I had it fixed by the dealer in Whitehouse, TN. Great people.

John

2007 Inspire 52028